4.8w 3528 LED Strip Light - 12v - IP20 - 1m - 4000K
Stock Code:
5535001-12v-IP20-4K
Stock Level:
245 Available
Description
4.8w 3528 LED Strip Light - 12v - IP20
- Supplied in custom lengths or 30m reel.
- Charged per 500mm and comes complete with professionally soldered tails.
Features:
| Code: 1m | 5535001-12v-IP20-4K |
| Code: 30m Reel | 5535001-12v-IP20-4K-30m |
| Wattage | 4.8w/m |
| Voltage | 12v DC |
| IP Rating | IP20 |
| LED Chip Type | SMD |
| LED/m | 60 |
| Colour Temp | 4000K |
| Lumen Output | 450lm |
| Dimmable | Yes (*with Dimmable Components) |
| CRI: | >80 |
| Beam Angle: | 120o |
| Wiring | Parallel |
| Width | 8mm |
| Cutting Increments | 50mm |
| Max Run Length | 5000mm (5m) |
Installation:
- LED Strip light must be installed on aluminium heat sink or aluminium channel.
- LED Strip must be used with correct 12v DC or 24v DC power supply with adequate allowance of load.
- LED Strip must not exceed the maximum run length specified in product details.
- Do not bend, twist or strongly pull LED strip during installation.
- LED Strip must not be installed in wet areas, and locations where water can be accumulated.
Warranty:
- 3 Year Residential Warranty: If used less than 8 hours per day.
- 1 Year Residential Warranty: If used for more than 8 hours per day.
- 1 Year Commercial Warranty.
Please note:
- All LED Strips are tested and carefully packed before dispatch.
- If products are defective during warranty period, they will be replaced under warranty terms.
- Vencha is not responsible for any additional expenses such as transport, access equipment and installation fees.
Returns:
- LED Strip supplied in custom lengths cannot be returned.
- LED Strip supplied in 30m Reels can be accepted but may incur restocking fees.